Properties
POLYTROL® gives a new glow and returns the colour to surfaces deteriorated by weather.
Penetrates deeply without creating a film, no risk of peeling.
Returns the original appearance immediately.
Long lasting result.
Application
The surface must be clean, free from grease and always dry.
POLYTROL® should not be applied on hot surfaces, in direct sunlight or on large areas. This is to avoid uncontrolled drying.
Apply plenty of POLYTROL® with a soft brush. Make sure the oil is evenly distributed on the whole surface. Move the oil from less absorbing to more absorbing areas if the surface is not absorbing evenly.
Remove all product after 5-10 min if the surface is not dry. Use a paper towel or rag that does not leave fluff. After drying, a second application may help obtain a better result.
Polish gently to obtain a shinier surface.
|
