Problem Solvers - Bursting with Scores of hard to come by maintenance tips! That Magic Ingredient  The MUST have for every DIY enthusiast!  Probably The Most Amazing Property Maintenance Product Ever Found In A Can! 74 Little Known Secret Solutions To Your Most Costly, Frustrating Home Painting & Maintenance Headaches
353-1-830 22 50 353-1-830 22 50 top_icon_facebook Cart icon €0.00
  • Home
  • Articles » Wood Care - Taking Care Of Your Wood » Reviving Grubby Looking Wooden Garden Furniture

    Faded hammock brought back to life with Net-Trol

    I bought a lovely set of wooden garden table and chairs last year and already they have become very faded and dried out looking. What are my options. Should I varnish them?  

    Many people leave their lovely garden chairs etc out there in the wind and rain and forget about them. Others treat them with the wrong finish resulting in the finish peeling off. Here are a few simple ideas and tricks to get your furniture looking lovely again.

    Firstly, you need to get the wood cleaned up and its colour restored. If there was a finish applied like an oil or stain in the past you will need to remove that with something strong like Prepdeck first. It's fairly easy to use. Sometimes in the course of removing the previous finish this stuff can darken the wood but you can reverse that with something like Net-Trol, an environmentally friendly, oxalic acid based cleaner brightener. If there was no stain or oil applied before and the wood has simply faded and become dirty all you will need is the Net-Trol. I've used it to bring back the original look to faded wood and even fibreglass. It also works well to remove fading on teak windows or doors after first stripping varnish off with Dilunett or DSP800 stripper.

    Back to your question, (assuming you there was no previous oil or stains applied) first you must wet the surface thoroughly and then apply the Net-Trol which can be diluted up to 4:1 ratio depending on how dirty or faded the wood is.

    Leave it for about 15 minutes and then give it a quick light scrub with a stiff nylon (not wire) brush. Rinse off thoroughly with a hose or better still a power washer at low to medium pressure. When fully dry, your wood should be back to how it looked on day one.

    You have various options after cleaning. If you like a nice natural look, you could apply Textrol, a clear, anti-UV penetrating oil that is easy to apply. Just two coats wet on wet one after the other and you end up with a lovely natural looking matt finish that will not peel or flake. Wipe off any excess and do not allow it to pond”. Textrol comes in a few possibilities.

    If you are really fussy, and have lots of time on your hands, you could apply numerous coats of Deks Olje D1 that penetrates the wood deeply and leaves a nice, satin finish. Deks Olje is used a lot on wooden boats. Deks Olje D1 is especially good on all hard woods. If you want a highly durable, yet flexible gloss finish, apply a few coats of Deks Olje D2 after a few coats of D1.

    For a completely modern or different look, you could also use a “stain” of any colour oil based paint, gloss or matte mixed 30% with my old favourite, all-rounder Owatrol oil. In that case a 4:1 wash with Net-Trol will suffice just to clean the surface before staining. This durable finish would be expected to last up to 6 years without any peeling or flaking. You can pick up those items at most specialist paint outlets, timber merchants and boat shops.




    Customers Also Bought these
    E-mail FacebookGoogle PlusLinkedInPinterestTwitterYouTube