Problem Solvers - Bursting with Scores of hard to come by maintenance tips! That Magic Ingredient  The MUST have for every DIY enthusiast!  Probably The Most Amazing Property Maintenance Product Ever Found In A Can! 74 Little Known Secret Solutions To Your Most Costly, Frustrating Home Painting & Maintenance Headaches
353-1-830 22 50 353-1-830 22 50 top_icon_facebook Cart icon €0.00
Clear Waterproofer for Brick, Stone, Renders etc. Eco friendly.
€ 60.95
Price Excl. Vat @ 23%

Owl DUCKY Water Repellant For Masonry

Share this
Facebook Twitter Google Plus

Owl DUCKY is a Deep Penetrating Clear Waterproofer For Brick, Stone, Masonry.

Owl DUCKY (previously known as Diasen BKK) is a powerful, Eco Friendly, colourless, breathable water repellent for exposed walls and buildings. Keeps out wind driven rain from bricks, stone, mortar, render, pebble dash, block, concrete, non glazed ceramics etc. Stops penetrating damp, protects against frost damage, being breathable, allows trapped moisture to evaporate. Compared to traditional solvent based products, DUCKY waterbased SILOXANE is not harmful to the environment or the user during application or curing.

Key Benefits: 

100% Water based, ecological, natural, not dangerous to health 

Penetrates deep 

Professional or Do It Yourself application 

Long lasting water repellancy 

Permeable to water vapour  

Does not alter the colour of the masonry 

Improves the thermal effeciancy of the wall because it protects against water absorbtion and humidity 

Resists efflorescence on brick and mould on masonry 
Ideal for protection of heritage or historical buildings 
Can be used on slightly damp surfaces 
Ready to use, no mixing required. 

Coverage: 
Bricks: 0.2 - 0.3 Litre per square meter 
Stone:  0.3 - 0.7 Litre per square meter 

CAN SIZE 5 Litres 

Application temp: 5C up to 35C 

Application: Using pump sprayer or brush apply a liberal coat taking care to cover entire surface. Apply a uniform second coat before first coat is completely dry. Repeat the application until saturation... 2 to 3 coats every hour should be sufficient. 

For best results apply to a dry absorbent surface. (The drier the surface - the better the absorbtion) DO NOT apply if rain is imminent. 

NOT SUITABLE to waterproof horizontal surfaces, basements, water basins, gypsum surfaces, elevator shafts or areas prone to ponding water.

Facebook Twitter Google Plus
Customers Also Bought these

Related Articles

Deep Penetrating and Colourless… Owl DUCKY

Deep Penetrating and Colourless… Owl DUCKY

Owl DUCKY (previously known as Diasen BKK) stops water ingress which causes efflorescence on bricks. This happens because rain water soaks into the bricks and when it evaporates later as moisture it pulls out various salts which leave unsightly blotches.

Brush off remaining efflorescence as best you can, some may remain but that will go eventually. Apply two coats of DUCKY to prevent further water ingress WATERPROOFS NATURAL LOOKING STONE Picture on right (Photo B) shows a lovely stone wall that has ugly rust streaks running down, caused by rusting of iron oxide particles in the stone itself.

If you apply DUCKY on to the stone before such problems develop from wind driven rain etc, you will prevent it happening in the first place. Where mortar is used, it waterproofs that also.

E-mail FacebookGoogle PlusLinkedInPinterestTwitterYouTube
Watch now