Deep Penetrating, Non-Peel Oil Finish For Exterior Woods 

Textrol is the answer when you want a deep penetrating, non-peel oil for your decking, cladding etc.

Penetrating oil finish / decking oil for weathered wood which protects against moisture and UV damage

• Developed for weathered wood  
• Penetrates and protects from within the wood 
   
• Properties  
• Use on horizontal and vertical surfaces.    
• Excellent penetration- Textrol goes into the wood not on the surface.  
• Non-film forming – will not crack, peel or flake.  
• Protects against moisture and UV damage.  
• Quick and easy to apply – “wet on wet” application.  
• Provides mildew resistance.  
• Easy maintenance – no stripping or sanding.

Destination  

• Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak …  
• Can be applied to both horizontal surfaces (decks, walkways) and vertical surfaces (cladding, shingles, fences) and other exterior wood structures  
• Not recommended for new wood – use Seasonite instead.

Application  

• Apply an application of Textrol and allow it to penetrate for 15-30 minutes.  
• Apply a second application and allow it to penetrate for 15-30 minutes.  
• Repeat this procedure until the wood is saturated i.e. will accept no more oil.  
• Do NOT allow Textrol to become touch dry or dry between coats (apply “wet on wet”).  
• Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.  
• Textrol gradually lightens over time due to exposure to the sun and UV rays. 
• Refer to the packaging for maintenance procedure. 

Multicoat coverage : 5 m²/l   

Coverage rate for maintenance : 10 to 12 m²/l  

Application tools : stiff bristle - brush - paint roller, airless spray   

Application temperature : 5°C to +35°C    

Working time : 24 to 48 h.     

Clean-up : White-Spirit 

Textrol may cost a bit more than other commonly available wood oils, but there are good reasons for that and you get what you pay for!