Your Cart

Owatrol ESP Primer

Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Hot
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
Owatrol ESP Primer
  • Stock: In Stock
  • Weight: 1.10kg
1812394 views
€29.79
Ex Tax: €24.22
44th year in business!
44th year in business!
Only proven formulas!
Only proven formulas!
Trusted by thousands of professionals
Trusted by thousands of professionals
Products so good they seem magic!
Products so good they seem magic!

ESP Primer: The Solution for Making Any Oil or Water-Based Paint Stick to Shiny, Smooth Surfaces

ESP Primer Makes Any Oil Or Water Based Paint Stick To Shiny Smooth Surfaces Without Sanding Or Mess.


PROPERTIES:   

  • Cleans old painted or varnished surfaces and leaves a thin grip film before recoating. 
  • Makes oil or water based paints or varnish to stick to any smooth non-porous surface. 
  • No tiresome or dusty sanding required. 
  • May be painted over any time after 2 hours or up to 7 days later. 
  • Easy to use... wipe on with a clean cotton cloth or brush. 
  • Will not damage old coatings. 
  • Reduces surface preparation time.

WHERE TO USE:   

  • Lacquers, baked enamels, varnishes, gloss paint, powder coated steel,  
  • Ceramics : bathroom or kitchen.
  • Melamine : kitchen cabinet makeover, furniture 
  • Glass, tiles, uPVC, Fibreglass, Melamine, powder coated metal, previously glossed or varnished surfaces,  

ESP is Ireland's biggest selling primer for smooth shiny surfaces since 1998. Order a can of ESP Now.


RECOMMENDATIONS BEFORE APPLICATION   

  • Ensure new finish is compatible with the old finish. 
  • Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings . (oil or water based only)
  • Remove any loose and flaking old finish. 
  • For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below. 
  • Wipe up ESP before drying. Use clean clothes and change them regularly. 
  • Do not contaminate new clean ESP with old used ESP. 
  • Do not use ESP for dipping. 

APPLICATION   

  • Apply a liberal application of ESP. 
  • Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP. 
  • Allow ESP to dry for 2 hours at normal room temperature before applying the finish.  

Coverage : 18 m²/l 

Application tools : Brush, roller, rag. 

Application temperature : +5°C to +35°C 

Recoating time : 2h to 7 days.  

Clean-up : Soap + Water  

Write a review

Please login or register to review