Owatrol Aquanett

Eco Friendly, Removes - Teak & Other Wood Oils Fast  

Solvent-free wood oil remover which strips new and old oils from severely weathered wood

• Removes previously applied oils including teak oil from any wood surface
• Restores the natural colour of the wood
• Gel consistency will not run making it ideal for vertical surfaces
• Prepares wood for a new coating, improving penetration and adhesion
• Suitable for environmentally sensitive areas

Properties

• Removes teak and other oils from all woods blackened by UV rays.
• Gel consistency.
• Ready to use – Easy Application
• Oils are dissolved in water
• Ready to use.
• Easy application
• Does not contain solvent or paraffin
• Biodegradable.

Where to use

• Apply direct on wood : outdoor furniture, decking etc  (Except oak & chesnut)

Directions

• Apply a thick layer of Aquanett to surface to be stripped.
• Allow to stand 5 minutes max.
• Apply 2nd application as soon as wet look of 1st application has disappeared and allow to penetrate (15 – 20 minutes)
• Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar).
• Using hot water makes stripping easier.
• Always neutralise surface after with Net-trol diluted 4:1.

Coverage: 4 sqm/l

Application Tools: Stiff Bristle/ Brush

Application Temperature: 5ºC to +35ºC

Working Time: 5 mins

Clean Up: Water