Owatrol Deks Olje D1















π₯ Hot















Owatrol Deks Olje D1}
from
45.56β¬
Ex Tax: 37.04β¬
Available Options
Deks Olje D1, Saturating Wood Oil, Interior, Exterior, Hard Woods, Boat & Home Saturating Oil For Interior And Exterior Hardwood With a Clear Satin Finish β Protects From Within.
Deks Olje D1, (pronounced 'decks o-lee-ay') Saturating oil for interior and exterior hardwood with a clear satin finish β protects from within
- Ideal for use on new oak and tropical Hardwoods β perfect for dense wood species
- Penetrates the wood fully and protects from within
- Extremely thin oil which saturates the wood, literally feeding it from within
- Easy maintenance β no sanding or stripping
Properties
- Can be applied to both horizontal and vertical surfaces.
- Saturates and protects all woods β Soft and Hard; Oily and Dense.
- Excellent penetration β non-film forming.
- Replaces the natural oils lost from the wood β will not blacken the timber.
- Transparent β Enhances the natural grain of the wood.
- Deep penetrating, stabilises the wood β Protects against moisture ingress.
- Easy maintenance β no sanding or stripping.
- Used alone, gives a silken matt finish or overcoat with Deks Olje D2 for a high gloss finish
Where to use
- Hardwoods and Tropical Timber : Teak, Mahogany, Oak, Chestnut, Movingui, Ipe, Bangkirai
- Softwoods : Pine, Larch, Spruce
- Exterior : garden furniture, hardwood windows and doors, patios, walkways, boat decks, topsides on boats, portals β¦
- Interior : paneling, stairs, doors, windows, door frames β¦
- Marine : Can be applied above or below the water line. Excellent primer for conventional single pack marine coatings.
- Horizontal β Vertical.
Application
- Apply a coat of D1 β Allow to penetrate for 15-30 minutes.
- Apply a second application. Allow to penetrate for 15-30 minutes.
- Repeat this procedure until the wood is saturated i.e. will accept no more oil.
- Once the timber is saturated, brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
- Do not allow D1 to become touch dry or dry between coats (apply βwet on wetβ).
- Refer to the packaging for maintenance procedure.
Multicoat coverage :1 to 4 mΒ²/l (depending on porosity)
Coverage rate for maintenance :8 to 12 mΒ²/l
Application tools :Brush - Roller
Application temperature :5Β°C to +35Β°C
Drying :24 h.
Setting up time before use :3 days.
Clean-up :White-Spirit
Choose Deks Olje D1 To Protect Your Hardwood





















