Owatrol Deks Olje D1

Deks Olje D1, Saturating Wood Oil, Interior, Exterior, Hard Woods, Boat & Home Saturating Oil For Interior And Exterior Hardwood With a Clear Satin Finish – Protects From Within. 

Deks Olje D1, (pronounced 'decks o-lee-ay') Saturating oil for interior and exterior hardwood with a clear satin finish – protects from within

• Ideal for use on new oak and tropical Hardwoods – perfect for dense wood species 
• Penetrates the wood fully and protects from within 
• Extremely thin oil which saturates the wood, literally feeding it from within 
• Easy maintenance – no sanding or stripping 

Properties 

• Can be applied to both horizontal and vertical surfaces. 
• Saturates and protects all woods – Soft and Hard; Oily and Dense. 
• Excellent penetration – non-film forming. 
• Replaces the natural oils lost from the wood – will not blacken the timber. 
• Transparent – Enhances the natural grain of the wood. 
• Deep penetrating, stabilises the wood – Protects against moisture ingress. 
• Easy maintenance – no sanding or stripping. 
• Used alone, gives a silken matt finish or overcoat with Deks Olje D2 for a high gloss finish 

Where to use 

• Hardwoods and Tropical Timber : Teak, Mahogany, Oak, Chestnut, Movingui, Ipe, Bangkirai
• Softwoods : Pine, Larch, Spruce 
• Exterior : garden furniture, hardwood windows and doors, patios, walkways, boat decks, topsides on boats, portals … 
• Interior : paneling, stairs, doors, windows, door frames … 
• Marine : Can be applied above or below the water line. Excellent primer for conventional single pack marine coatings. 
• Horizontal – Vertical. 

Application 

• Apply a coat of D1 – Allow to penetrate for 15-30 minutes. 
• Apply a second application. Allow to penetrate for 15-30 minutes. 
• Repeat this procedure until the wood is saturated i.e. will accept no more oil. 
• Once the timber is saturated, brush out or wipe up any excess product that has not penetrated to avoid shiny spots. 
• Do not allow D1 to become touch dry or dry between coats (apply “wet on wet”). 
• Refer to the packaging for maintenance procedure.

Multicoat coverage :1 to 4 m²/l (depending on porosity)

Coverage rate for maintenance :8 to 12 m²/l

Application tools :Brush - Roller

Application temperature :5°C to +35°C

Drying :24 h.

Setting up time before use :3 days.

Clean-up :White-Spirit

Choose Deks Olje D1 To Protect Your Hardwood